Setting up an Amped wireless extender is one thing and managing it is another. However, a lot of users are unable to get success with the latter one. Do you know why? Because they are unaware of the process to access setup.ampedwireless.com
For your information, setup.ampedwireless.com is the default web address of the Amped range extender that allows users to manage and monitor their devices. Are you also finding it hard to access setup.ampedwireless.com? Worry not! This is where we’ve got you covered. Here, we will provide you with the easiest guidelines to access the Amped wireless extender’s default web address. Keep reading.
5-Steps to Access Setup.ampedwireless.com
- Power Up Your Amped Extender
To begin with, plug your Amped range extender into a power socket and set the power button to the ON position. Make sure that your device is properly connected to the wall socket.
Additionally, the power socket used to power up the extender should not be damaged. Know that the damaged power socket can expose your WiFi device to the risk of permanent damage.
- Connect Your WiFi Devices
Done with powering up your Amped range extender? Is the power light on your device stable? Great! You’re doing well so far. Now, the next step is to make a connection between your Amped wireless range extender and the host router.
You can create the connection with the help of the Ethernet cable or a wireless source. But, make sure you complete the requirement of a stable connection. A wireless connection can be stable if the distance between devices is optimal. Whereas, a wired connection needs a damage-free networking cable to function steadily.
- Switch On Your Computer
Get access to a PC and switch it on. Is your PC ready to use? If yes, then check whether it is updated or not. If not, then update it software before accessing setup.ampedwireless.com.
Also, check for viruses on your PC. The reason is that viruses can make things go haywire and halt you from accessing setup.ampedwireless.com. Thereby, preventing you from reaching the Amped extender dashboard. If any virus is found, delete it to fix things from your end.
- Open a Web Browser
Now, load a secure web browser that you find easy to use. No matter whether you opt for Google Chrome or Apple Safari, the internet browser is supposed to be updated.
Additionally, it should be free from the cache, cookies, and browsing history. It will prevent the loading of the cached version of the login page and help you reach the Amped setup page without any problem.
- Visit Setup.ampedwireless.com
Navigate the cursor of your mouse to the Uniform Resource Location (URL) bar of the internet browser. Note the URL bar is also known as the address bar. Here, enter setup.ampedwireless.com and press the Enter key.
You will be taken to the admin page of your Amped range extender. In case you don’t get redirected there, chances are that you used the incorrect default web address. Apart from this, entering the web address into the search bar can halt your access to setup.ampdwireless.com.
In this manner, you can access setup.ampedwireless.com. After that, you need to enter the password of your WiFi device in order to reach the Amped wireless extender setup wizard and manage the extender as per your requirements.
The Bottom Line
Accessing setup.ampedwireless.com successfully will unlock the settings of your Amped extender. We hope that the 5-step guidelines shared in this post will help you easily access setup.ampedwireless.com.
Now, you are free to update the firmware, enable MAC filtering, change the password, hide the SSID, configure BoostBand technology, and do many more on your Amped extender. All you have to do is tweak the respective setting of your Amped device.
Hello, I am a professional SEO Expert & Write for us technology blog and submit a guest posts on different platforms- we provides a good opportunity for content writers to submit guest posts on our website. We frequently highlight and tend to showcase guests.